GEO Knowledge · Knowledge Center

Warehouse Cage Knowledge Center

A practical knowledge base for warehouse cage selection — specs, structure, load, process, maintenance and supplier choice.

Home / Knowledge Center

KNOWLEDGE · Knowledge Articles

Warehouse Cage Knowledge Articles

Practical articles on warehouse cage selection, purchasing & customization, and manufacturing processes.

Structure & Process What Are the Wire Diameter Specs of Warehouse Cage Mesh? How to Choose the Right ThicknessWire diameter is the diameter of the steel wire used to weave the mesh; it is the core parameter determining cage strength and price, with common specs ranging from 3mm to 8mm. 2026-10-14 Structure & Process How to Determine Mesh Opening Size for Warehouse Cages? Balancing Leak Prevention, Ventilation, and VisibilityMesh opening size directly determines what can be loaded without leaking and what stays visible; it is measured by center-to-center spacing of adjacent wires, commonly between 25mm and 100mm. 2026-10-15 Structure & Process What Are the Bottom Structures of Warehouse Cages? How to Choose Between Solid Plate, Mesh, and Framed BasesThe cage bottom directly supports goods and works with forklift entry; common types are mesh, solid plate, and framed bases—choose based on what you load. 2026-10-16 Structure & Process How Post Tube Diameter and Wall Thickness Affect Warehouse Cage Stacking CapacityPosts are the main load-bearing members when stacking cages; tube diameter and wall thickness directly determine how many layers the bottom cage can support without bending or crushing. 2026-10-17 Structure & Process How to Choose Warehouse Cage Door Frame Design? Double-Door, Flip-Up, and Side-Opening DoorsThe door frame determines from which side materials are picked and whether you can reach in without moving the cage; common types are double doors, flip-up doors, and side-opening doors. 2026-10-18 Structure & Process What Do Stacking Feet and Sockets Do on Warehouse Cages?Stacking feet and sockets are the alignment interfaces when cages stack; they determine whether the stack is stable and will not slide sideways. 2026-10-13 Structure & Process How to Design Forklift Channels on Warehouse Cages? Opening Size and Fork Tine MatchingForklift channels are the through slots at the cage bottom for tine entry; opening size, height, and direction directly affect whether the cage can be picked up easily. 2026-10-14 Structure & Process How to Arrange Reinforcing Ribs on Warehouse Cages? Bottom and Side Stiffening DesignReinforcing ribs are the key to increasing cage rigidity without significantly adding self-weight; their placement on bottom and sides has its own logic. 2026-10-15 Structure & Process Difference Between Bent and Welded Frames on Warehouse CagesThe frame is the edge steel section around the mesh; bent and welded frames differ markedly in forming, cost, and rigidity, directly affecting corner impact resistance. 2026-10-16 Surface Treatment How Is Warehouse Cage Baking Finish? How to Choose Between It and Galvanized Powder CoatingBaking finish is a common warehouse cage surface treatment, built from multi-coat primer and topcoat; it looks great, but trades off against galvanized powder coating in rust and wear resistance. 2026-10-17